Elipse LOW PROFILE GAS & PARTICULATE MASK
The gas cartridges contain specific activated carbon granules with optimised characteristics such as pore size, grain size, activity level, density etc, which provide a maximum adsorption performance and a low breathing resistance.
Each respirator is supplied with two gas cartridge filters for the protection against a range of gases, vapours, dust and mists.
Once the cartridges are finished, they can be replaced with replacement filters. These offer versatile protection against substances in concentrations up to 1,000 ppm and from dust and mists up to 50 TLV.
Compact, lightweight and flexible design which adapts and fits perfectly to the face and offers a full range of visibility without interferingwith other eye or ear protections which users choose to wear. Large central non-return valve which allows for a reduction of breathing resistance for the user and keeps moisture build-up inside the mask to a minimum. Lightweight, non-slip strap that is easily adjusted in 4 positions for improved comfort and to allow safe use even in high humidity or wet conditions. Elipse® comes in 2 sizes.
- APPLICATION
A1P3: Painting, Solvents into Automotive and Shipyard industry or repair.
B1P3: Manufacturing using Iodine, Chlorine or Formaldehyde such as in insulation, industrial or consumer products, metal separation, microelectronics
- MATERIALS
The materials used for masks and filters are hypo-allergenic, odourless, FDA compatible and Non latex or silicone.
- TYPE OF FILTRES / CLASS
A1P3 R D & FFA1P3 R D: For protection against certain organic gases and vapours with a boiling point > 65 °C as specified.
B1P3: For protection against certain inorganic gases and vapours.
Containing a P3 HESPA™.
- BATCH REPORTS
Full traceability of each batch against each material used.
- ONLINE TESTING
100% of filters are efficiency tested with NaCl to ensure the highest performance and quality.
- STORAGE LIFE
5 years, for mask and filters.
Dimensions
- Mask: 93 x 128 x 140 mm
- Filter: 48,5 x 94,5 x 60 mm
Weight
- Mask + Filter: 257,7 g
- Mask body: 97,6 g
- Filter only 83 g each
Material:
Mask: Medical grade TPE (Silicone free).
Filters:
- Activated carbon with ABS shell.
- Mechanical type HESPA™ Synthetic media with with TPE over mould / encapsulation.
Lifetime:
Filters can be used until fully clogged and / or the wearer feels uncomfortable or until the activated carbon is exhausted and the wearer an smell / taste the contaminant. The lifetime will depend on the concentration in the workplace and the activity level. The filtration level will stay constant throughout the usage. All masks are supplied with an aluminium zip foilbag for storage to maximize the life expectancy of the activated carbon. The particulate element lifetime can also be increased by usage of our pre-filter kits below.
Distance from the bridge of your nose to the point of your chin ↓ |
GVS Elipse masks size guide |
||
128.5 - 138.5 mm |
M/L | M/L | M/L |
118.5 - 128.5 mm |
S/M | M/L | M/L |
108.5 - 118.5 mm |
S/M |
S/M |
M/L |
98.5 - 108.5 mm |
S/M |
S/M |
S/M |
Distance between the Zygomatic Arches → |
120.5 - 133 mm |
133 - 146 mm |
146 - 158.5 mm |
| MODEL | DESCRIPTION | ARTICLE | PACKAGING |
|
A1P3 Reusable Half Mask for Organic Gases and Dust | SPR338 (S/M) SPR503 (M/L) |
10 pcs. per box |
|
Pair of replacement A1P3 Filters | SPR341 |
6 sets of 2 pcs. per box |
|
Kit of Prefilter Kits 2 holder and 10 pads |
SPM420 |
10 pcs. per box |
|
Kit of Prefilters 20 pads |
SPM414 |
10 kits per box |
|
GVS Low Profile Half Mask Carry Case | SPM008 |
10 pcs. per box |
